Areas We Serve Around Crown Heights
We are a service-area crew based in Crown Heights, and we deliberately keep the radius short. That is what lets us offer same-week appointments and show up already knowing the building type.
Where does Crown Heights Chimney Sweep work?
We work in Crown Heights first and the neighborhoods that touch it second: Prospect Heights, Bedford-Stuyvesant, Clinton Hill, Flatbush, East Flatbush and Brownsville. All of it is central Brooklyn, within a short drive of our home blocks. We do not keep a storefront. The crew comes to your building with the equipment on the truck, Monday through Saturday, with same-week appointments in every one of these areas.
Why We Stay Close
A chimney crew that covers the whole city spends half the day on the BQE. Ours spends it on roofs. Staying within a few neighborhoods of our home blocks means we can inspect in the morning, pick up brick and mortar, and be back the same day if a job calls for it.
It also means we know the stock. The limestone rows and Eastern Parkway apartment houses of Crown Heights set the pattern, and every neighborhood around us is a variation on it: more brownstone, more frame, more pre-war apartment, more 1920s-30s brick two-family. The chimneys change with the housing, and so does the work.
The Neighborhoods and What Their Chimneys Need
One line on each area, with what we most often find when we get on the roof.
- Prospect Heights: four-story brownstones with flat roofs and original cornices, plus new condo buildings along Atlantic Avenue near Barclays, so we split our time between repointing century-old stacks and inspecting flues in buildings that have never been swept.
- Bedford-Stuyvesant: the largest collection of intact Victorian brownstones in the country, with flat built-up roofs, cornices and parapets, many mid-renovation, which means a lot of fireplaces being reopened and flues that need a Level 2 inspection and usually a liner before the first fire.
- Clinton Hill: Italianate brownstones and freestanding Clinton Avenue mansions with mansard and slate roofs next to Pratt and large pre-war apartment houses, where flashing a chimney through slate and mansard framing is a careful job in copper and lead.
- Flatbush: six-story pre-war apartment buildings with flat roofs, parapets and bulkheads, plus Victorian frame houses in Prospect Park South, so one day is a tall boiler stack coordinated with a super and the next is an exterior brick chimney on a frame house with a pitched roof.
- East Flatbush: attached brick two-families from the 1920s-30s with flat roofs, detached frame Capes and semi-detached rows with aging built-up roofs, where the common calls are crumbling mortar joints, rusted dampers and boiler flues that need relining.
- Brownsville: attached brick two- and three-families and large NYCHA developments with flat roofs and aging built-up systems, where chimney leaks at the roof line are the usual reason for the call and the fix is almost always crown and flashing.
Prospect Heights
Four-story brownstones carry old multi-flue stacks that deserve careful hands. Our crew comes over from Crown Heights for sweeps, inspections, liners and brick repair.
Learn more →Bedford-Stuyvesant
Bedford-Stuyvesant holds the largest run of intact Victorian brownstones in the country, and most of their chimneys have never been relined. Our Crown Heights crew sweeps, inspects, rebuilds and repoints them.
Learn more →Flatbush
From six-story boiler stacks to Victorian wood-burning fireplaces, Flatbush chimneys cover the whole trade. We handle both from Crown Heights.
Learn more →East Flatbush
The chimney on an East Flatbush two-family vents your boiler and water heater every day of the heating season. Our Crown Heights crew keeps that flue lined, capped and dry.
Learn more →Brownsville
Aging built-up roofs and brick stacks that have not been touched in decades make Brownsville chimneys leak first and fail quietly. Our Crown Heights crew inspects, repoints and relines them.
Learn more →Clinton Hill
Slate mansards and tall Italianate stacks call for copper, lead and patience. Our Crown Heights crew brings all three to Clinton Hill chimneys.
Learn more →How Scheduling Works Across These Areas
Because the footprint is small we route by geography, not by first-come. That is how a Brownsville leak and a Clinton Hill sweep can both land in the same week.
- Tell us the neighborhood and building typeA brownstone, a pre-war apartment building and a frame Cape need different ladders, different access and sometimes a different crew size. Knowing this up front lets us bring the right setup the first time.
- We group nearby jobs on the same dayCrown Heights and Prospect Heights usually share a day, as do Flatbush and East Flatbush. If your building is flexible on timing we can often fit you in sooner by slotting you with a neighbor.
- Access is arranged before we arriveFor apartment buildings we confirm roof access with the super or managing agent and send insurance documents in advance. For rowhouses we confirm whether roof access is through a hatch, a bulkhead or a neighbor's roof.
- Urgent calls jump the routeActive leaks, smoke in the house and unstable stacks get the next available slot regardless of neighborhood. Everything else keeps its place in the week.
Frequently Asked Questions
Do you charge more for jobs outside Crown Heights?
No. Every neighborhood on this page is close enough that travel is not a factor in what we quote. Pricing is driven by the chimney itself: height, roof access, the condition of the masonry and what is connected to the flue. A brownstone in Bedford-Stuyvesant and a limestone row on our home blocks with the same problem get the same quote.
My building is just outside the neighborhoods you list. Will you still come?
Call and ask. If you are on the edge of one of these areas, the answer is usually yes. If you are much further out, we would rather tell you so than stretch the schedule and show up late to everyone. We keep the service area small on purpose so the people inside it get same-week appointments and the same crew each visit.
Can the same crew handle a brownstone and a six-story apartment building?
Yes, but we plan them differently. A brownstone chimney is reached by ladder or through a roof hatch and is usually a one- or two-person job. A pre-war apartment stack means bulkhead access, coordination with a super, longer flue runs and sometimes rigging for materials. We bring the setup the job needs, which is why we ask about the building type when you book.
How quickly can you get to an active leak in East Flatbush or Brownsville?
Active leaks move to the front of the schedule regardless of neighborhood, and both areas are a short drive from our home blocks. The first visit is about stopping the water and making the stack safe, usually a temporary seal at the crown or flashing. The permanent repair in mortar and copper follows once the roof is dry and the temperature allows the work to cure.
Do you work with property managers and supers, or only owners?
Regularly. Most of our pre-war apartment work in Flatbush and Prospect Heights comes through a managing agent or a super rather than an individual owner. We send insurance documents before the visit, coordinate roof access around the building's schedule and write our reports so a board can read them without a translator.
In One of These Neighborhoods? We Can Be There This Week
Call (347) 555-0188 or email [email protected] with your neighborhood and building type. We serve Crown Heights and the areas around it, Monday through Saturday.